G+
Description
G+ is our general purpose, workhorse resin. G+ is a fast curing low viscosity 3D printing resin that results in a very hard 3D print with little to no flexibility. G+ can be used for a number of different 3D printing applications.
G+, like all of our resins, cures under UV A, B, and C light up to around 420nm. It can be cured with a DLP projector, a UV laser, or UV leds. When using UV lasers or LEDs, the cure time is extremely fast, so you don’t need much power.
This resin is low odor and contains zero VOC.
Additional information
Specification: G+
| Header | G+ |
|---|---|
| Model number | GPMR500 |
| Brand | Makerjuice |
| Voloum ml | 500 |
| Material name | G+ |
| Technology | SLA / DLP |
| How it comes | Resin |
| Properties | 3D Printer Resins |
| General material type | Resin |
| Material group specific material type | High Detail Resin |
| Colour | Red, Orange, Green, Indigo, Purple, Black |
| Datasheet | https://dl.airtable.com/F0GBSeKLSBTnKnkCk2dA_hflMF7LJTwIGtwOzZtYw_GPlus-TDS.pdf |
| Tensile strength ultimate xy in mpa | 62.7 |
| Elongation at break xy | 6 |
| Shore hardness shore d a | 75 D |
| Glass transition temperature | 104 |
| Density g cm | 1.1 |
| Ash content | 0.2 |
| Legal disclaimer | 3DC LTD is not liable for the accuracy of the information contained within this database. Please consult directly with the relevant machine and/or material manufacturers before determining fitness for a particular use. |
