Bigrep Basalt PRO HS Filament 2.85 mm
Description
The BigRep PRO HS is an innovative, robust and biodegradable material with the same mechanical properties as the PLA but with a high extrusion rate, enabling large-scale 3D printing at higher speed.
This filament was created using biopolymers, which makes it sustainable and biodegradable. The extrusion of the PRO HS is possible at a low temperature (170°C), it means that the production with PRO HS needs less energy than with other materials, lowering their environmental impact. As it is not oil based, the PRO HS is also a very good ecological alternative to ABS.
The PRO HS can be used in every industry field producing mid to large-scale patterns or ready-to-use prototypes at high-speed and high-quality. It can print almost twice as fast as the PLA and that with no modification of the 3D printer.
Additional information
Specification: Bigrep Basalt PRO HS Filament 2.85 mm
| Header | Bigrep Basalt PRO HS Filament 2.85 mm |
|---|---|
| Model number | 10000510, 74 |
| Brand | Bigrep |
| Weight | 8 |
| Material name | Bigrep Basalt PRO HS Filament 2.85 mm |
| Technology | FDM |
| How it comes | Filament |
| General material type | Plastic |
| Material group specific material type | PRO HS |
| Colour | Grey |
| Tensile strength ultimate xy in mpa | 43 |
| Flexural modulus xy in mpa | 3500 |
| Impact strength | 59 |
| Density g cm | 1.4 |
| Company | Bigrep |
| Continent | USA |
| Diameter | 2.85 mm |
| Spool | Yes |
| Min printing temperature | 170 °C |
| Max printing temperature | 210 °C |
