FilaFlex Fluor 95A PLA Filament 2.85 mm 3kg

FILAFLEX 95A MED-FLEX

The Filaflex Medium-Flex filament allows making flexible and resistant parts, being also compatible with all the 3d printers of the market. The new reformulation and Shore hardness 95A allows printing at a higher speed than any other flexible filament, and similar printing settings as PLA filaments. This material is very simple to use without making any modifications in your 3d printer.

FEATURES

Diameter tolerance +/- 0.04mm
Compatible with bowden type printers.
High elasticity and excellent abrasion resistance
No need for heatbed, blue-tape or buildtak surface.(for huge parts we recommend 3D lac or hairpray)
Print speed up to 20-120mm / s
Printing temperature 215-235 C
Odorless
Resistant to common solvents (acetone, fuel etc.)

RECOMMENDATIONS FOR USE

To start with Filaflex 95A medium-flex, the configuration of your printer should be:

DIRECT DRIVE 3D PRINTERS SUCH AS (Witbox 1,2, hephestos 2, Makerbot series)

Layer height: 0.08-0.3 (for nozzle 0.4mm) Optimal results with height 0.2mm
Printing speed: 45-60mm / s
Temperature: 215-225 Celsius
Retraction speed: 35-120mm / s
Retraction distance: 3.5-5mm
Traveling speed: 160-200mm / s

BOWDEN TYPE 3D PRINTERS (Ultimaker; BCN3D Sigma, Delta etc)

Print speed: 25-50mm / s
Temperature: 220-235 Celsius
Retraction speed: 10-45mm / s
Distance Retraction: 3.5-8mm
Traveling speed: 160-200mm / s