Technology Outlet PLA Plus Yellow 1.75mm
- Material PLA filament
- Diameter 1.75mm
- Filament weight 1 KG
- Print Temperature 190 – 220°C
- Best temperature 200°C
- Bed temperature 40-50°C or turn off the heated bed
- Compatible with Makerbot, UP, Cubify, Leapfrog Creatr, Builder, Felix, Reprap,Ultimaker and any most other FDM 3D printers
- Package 1kg/spool
- Sealed plastic bag with desiccants.
Description
PLA 3D Printer Filament (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn’t require a heated bed.
It has the following characteristics:
1. Good toughness high strength, high stiffness
2. Less prone to blocked nozzles,
3. Can be processed at 200 degrees
4. Low shrinkage, thermoforming dimensional stability
5. Accurate diameter: 1.75mm, variations + /-0.1mm,roundness +/-0.05mm;
Additional information
Specification: Technology Outlet PLA Plus Yellow 1.75mm
| Header | Technology Outlet PLA Plus Yellow 1.75mm |
|---|---|
| Brand | Technology Outlet |
| Weight | 1 |
| Material name | Technology Outlet PLA Plus Yellow 1.75mm |
| Technology | FDM |
| How it comes | Filament |
| General material type | Plastic |
| Material group specific material type | PLA |
| Features | Material PLA filament |
| Colour | Yellow |
| Elongation at break xy | 25 |
| Flexural strength xy in mpa | 55 |
| Impact strength | 7.2 |
| Company | Technology Outlet |
| Diameter | 1.75mm |
| Min printing temperature | 195 °C |
| Max printing temperature | 235 °C |
| Min hot bed temperature c | 40 |
| Max hot bed temperature c | 50 |
