DMLS Maraging Steel(MS1)

Manufacturing Infomation

Pricing: $28.57/cm3
Minimum Cost:$88
Lead Time: 12 days
Max Print Size(mm):
250 x 250 x 320
Min Print Size(mm):
5 x 5 x 5
Layer Heights(mm):
0.05
Dimensional Accuracy:
±0.2% (with a lower limit of ±0.2 mm)
Smooth: 3/5
Detail: 4/5
Accuracy: 4/5
Rigidity: 5/5
Flexibility: 3/5

Gallery

Suitable for:

  • Functional prototypes and end products
  • Cases, holders, adapters
  • Form and fit testing
  • Functional prototyping and testing
  • Not Suitable for:

  • Complex designs with intricate details
  • Large models
  • Cavities within design (unless making use of escape holes)
  • Colours Available

    Metal

    Colours Post Process

    Polish, Sandblast

    Additional Info

    The pricing for Maraging Steel is based on:

  • Model volume: The volume of your model is used to calculate the material cost (mm³)
  • The box around your model: An imaginary box around your model determines how much space your design will take up in the printer (X * Y * Z = mm³)
  • Model surface
  • For maraging steel, we charge a minimum price per ordered piece. Unlike the startup cost (which is applied to most materials), this cost vanishes when the price is higher than the minimum price.

    Features

    Watertight
    Foodsafe
    Glue-able
    Recycleable
    Biocompatible
    Biodegradable
    Additive Manufacturing

    Design Rules

    Min Supported Wall Thickness:1mm A supported wall is one connected to other walls on two or more sides.
    Min Unsupported Wall Thickness: 0.8mm An unsupported wall is one connected to other walls on less than two sides.
    Min Supported Wires:1mm A wire is a feature whose length is greater than five times its width. A supported wire is connected to walls on both sides.
    Min Unsupported Wires:0.8mm A wire is a feature whose length is greater than five times its width. An unsupported wire is connected to walls on less than two sides.
    Min Embossed Detail: 0.6mm A detail is a feature whose length is less than twice its width.
    The minimum detail is determined by the printer's resolution.When detail dimensions are below the minimum, the printer may not be able to accurately replicate them. Details that are too small can also be smoothed over in the polishing process.

    To ensure details come out clearly, make them larger than the indicated minimum. We may refrain from printing products with details smaller than the minimum, since the final product will not be true to your design. If your product has details smaller than the minimum, try making them larger, removing them, or considering a material with finer detail.
    Min Engraved Detail:0.6mm A detail is a feature whose length is less than twice its width. Engraved or debossed details go into a surface.
    Min Escape Holes:0mm
    Min Clearance:0.8mm Clearance is the space between any two parts, walls or wires. To ensure a successful product, make the clearance between parts, walls, and wires greater than the indicated minimum. If your clearance is too small, try making the gap bigger, or consider fusing the parts or features if their independence is unnecessary. You can also try a material with a smaller minimum clearance.
    Interlocking/moving or enclosed parts?No Sometimes the interlocking/moving parts can't be printed, since the supports inside the cross section can't be removed.
    Require Support Material?Yes Because each layer needs to build off the last, for some material, angles of more than 45 degrees generally require supports to be printed along with the design. Supports are not inherently detrimental for your design, but they do add complexity to the printing process and lead to less smooth finish on overhanging parts.

    Manufacture With This Material